ESCO Technologies ETS-Lindgren EMControl 7006-001, User Manual

Page: 81 / 91

ets-lindgren.com EMControl Command Set 81
*IDN?
Description: Identification query. Determines the nature of device located at a
given address on the GPIB bus.
Prepares controller to respond with an ASCII character string
when queried. The string returned ( ETS Lindgren, EMControl
XXXX-XXX, N.N.N ) identifies this controller as an EMControl
module.
The XXXX-XXX parameter is a placeholder for the device model
number.
The N.N.N parameter is a placeholder for the firmware revision
level.
Devices: Turntables, towers
Syntax: *IDN?
Response: ETS-Lindgren, EMControl XXXX-XXX, N.N.N

N.N.N is the revision number

XXXX-XXX is the model number
Example:

Write sd*IDN?\n : Query the identification string

Read response

Response is ETS-Lindgren, EMControl 7006-001, 1.5.0 :
EMControl Model 7006-001, firmware version 1.5.0