ESCO Technologies ETS-Lindgren EMControl 7006-001, User Manual

Page: 80 / 91

80 EMControl Command Set ets-lindgren.com
*ESE?
Description: Query Standard Event Status Enable Register. Prepares the
controller to respond with the contents of the Standard Event
Status Enable Register when queried.
Value returned is an integer number in the range of 0 to 255. This
value, when expressed in binary form, represents bit values of
the Standard Event Status Enable Register.
Devices: Turntables, towers
Syntax: *ESE?
Response: XXX : Integer value representing the setting of the Event Status
Enable Register
Example:

Write sd*ESE?\n : Query ESE register

Read response

Response is 16\n : Set to allow an execution error to set ESB
See Also: *ESE