ESCO Technologies ETS-Lindgren EMControl 7006-001, User Manual

Page: 75 / 91

ets-lindgren.com EMControl Command Set 75
VS?
Description: Queries the variable speed capability of the device.
Devices: Turntables, towers
Syntax: VS?
Response:

<flag> : Indicates if a device is capable of variable speed
control
0 : Device is not capable of
variable speed control
1 : Device supports variable speed
Example:

Write sdVS?\n : Is device variable speed?

Read response

Response is 1\n : Is a variable speed device
WL
Description: Changes the clockwise limit of the device. The specified value
must be greater than the counterclockwise limit and between
–999 and 999.
Devices: Turntables
Syntax: WL [+/-] XXX

+ : Optional for positive values

–
: Necessary for negative values

XXX : Decimal value for the clockwise limit to be set in
degrees. Leading zeroes are optional.
Response: OK , or an error (error number)
Example: Write sdWL 90\n : Change CW limit of the turntable to
90 degrees
See Also: WL?