7
6
INTRODUCTION
The ETS-Lindgren’s 2302 Type Positioners (Columns) are designed to
perform automated 3-dimensional pattern measurements. The positioner is
utomated 3-dimensional pattern measurements. The positioner is
a vertical support column that will accommodate its respective antenna.
a vertical support column that will accommodate its respective antenna.
There are three types of 2302 positioners available. Each have varying
There are three types of 2302 positioners available. Each have varying
heights, capabilities, absorber, and antenna types and are equipped with an
heights, capabilities, absorber, and antenna types and are equipped with an
XY alignment capabilities that allow for fine adjustment of antennas.
XY alignment capabilities that allow for fine adjustment of antennas.
2302-001
2302-002
2302-003
WARRANTY
Only qualified
personnel should
operate (or service)
this equipment.
If you have any
questions concerning
maintenance, contact
ETS-Lindgren Technical
Support. Warranty may
be voided if housing is
opened.
Note:
See the ETS-Lindgren
Product Information
Bulletin
for safety,
regulatory, and other
product marking
information.
Note:
ETS-Lindgren may
substitute a similar or
new part number with
the same functionality
for another part
number. Contact ETS-
Lindgren for questions
about part numbers
and ordering parts.
Before performing any
maintenance, read
the safety information
in the ETS-Lindgren
Product Information
Bulletin
included with
your shipment.
Standard Configuration
• Model 2302 Assembly
• 1723531 User Manual available in PDF
2302 Positioner Assembly
• •
Vertical column
Vertical column
• •
Absorber to cover the positioner
Absorber to cover the positioner
• •
Laser for aligning system (002, 003)
Laser for aligning system (002, 003)
• •
Antenna/Horn (sold separately)
Antenna/Horn (sold separately)
*Images not to scale*