- 42 -
To change the USB mode, tap the display briefly to show the symbols if necessary. Then tap bottom left on
the symbol for the current USB mode in order to re-display the selection of 3 symbols as described above.
Then tap the symbol for the required USB mode.
Reset
If the reader stops working as described in this manual, it may be due a fault that you can rectify yourself by
resetting the reader. Insert a small, pointed object carefully into the opening labelled RESET (
i
) and press the
switch contained within.
Care Instructions
X
When cleaning the mobilux DIGITAL Touch HD do not use any soap solutions that contain softening
agents, alcoholic or organic solvents, and do not use abrasive detergents!
X
Do not clean the mobilux DIGITAL Touch HD in an ultrasonic bath or under flowing water!
X
Only clean the mobilux DIGITAL Touch HD with a soft, dry cloth. For heavier soiling (e.g. fingerprints),
moisten the cloth slightly.
X
If you are not using the mobilux DIGITAL Touch HD, always keep it in the hard foam case supplied.
Summary of Contents for Mobilux Digital Touch HD 16511
Page 3: ... 3 ...