Eschenbach BAR899HG User Manual Download Page 1

1

EN

INTRODUCTION

Congratulations on your purchase of the BAR899HG Wireless
Weather Station with In-Out Thermo-Hygrometer and RF
Clock.  This unit is an all-in-one weather forecasting device
which has multiple weather-related functions.

In addition to indoor temperature and humidity, by means of
wireless remote thermo-hygro sensor it can simultaneously
monitor temperatures and humidities in up to 3 remote
locations. The unit will show temperature and humidity
trends as well as record maximum and minimum temperature
and humidity readings.

As part of the weather forecasting function, the unit has a
built-in barometer that displays atmospheric pressure.  Using
kinetic-movement graphic illustrations the unit displays
atmospheric pressure trends and displays forecasts as
sunny, partly cloudy, cloudy, rainy and snowy.

This unit is also a Radio Frequency (RF) controlled clock.  It
can automatically synchronize its current time and date

WIRELESS WEATHER STATION

WITH IN-OUT THERMO-HYGROMETER AND RF CLOCK

MODEL : BAR899HG

USER'S  MANUAL

when it is brought within an approximate 1500-km radius of
the radio signal DCF77 generated from Frankfurt, Germany.

Other features of BAR899HG include daily crescendo alarm
and Pre-alarm function with an eight-minute snooze function.

No wire installation is required between the main and remote
units as this unit operates at 433 MHz.

Summary of Contents for BAR899HG















Reviews: