Eschenbach 1659-16, Operating Instructions Manual

Page: 17 / 72

- 17 -
EN
Setting the date and time
The time will only be displayed in the menu once it has been set. Select this symbol and
then press the button
e
to set the time. Select the symbol so that you can increase
the number of the parameter displayed in yellow using the button
e
. Select the
symbol so that you can decrease the number of the parameter displayed in white using
the button
e
. Select the symbol and then press the button
e
to select the next
parameter to be set.
Select “24H” and press the button
e
to change from a 24-hour display to the 12-hour
display normally used in English-speaking areas or vice versa.
The date format normally used in the EU is set as standard. Select EU and use the
/
symbols to change the date format if required.
Adjusting the reading line/row
Select this symbol and then press the button
e
to set the details for the reading line
or row using the following symbols:
- move the reading line position upward or magnify the reading row
- move the reading line position downward or minimize the reading row
- turn the reading line/row on/off
- switch to “red reading line” or “reading row”
- switch between horizontal/vertical reading line/row
Alternatively you can use the
d
and
f
arrow keys to change the position of the “reading
line” or “reading row”.
Adjusting maximum magnification
Select the symbol for the maximum magnification factor that should be available.
The selected zoom factor is ignored in DLS mode.