Escene Communication
www.escene.cn/en/
Hang up while using the
Handset
--Return the handset to its cradle,
-or press
End
Hang up while using the
Speakerphone
--Press
Speaker
button
that is Red
,
-or press
Line
button for the appropriate line,
-or press
End
Hang up while using the
Headset
--Press
Handset
button,
（
Do not keep the headset mode),
-or press
End
(keep the headset mode)
Hang up one call, but
preserve another call on
the other line
--Press
End
,
-or refer to the above three methods
3.5.9 Using Hold and Recover (Switch Calling Line)
You can hold and resume calls. You can take a call in one line at any time, and the other lines would be hold. As a result of that,
you can switch different calling line on our phone.
If you want to...
Then...
Put a call on hold
--Press
HOLD
button,
-or press soft key
Hold a line and switch to
another line
Press another
Line
button for the appropriate line
Resume a call on current
line
--Press
Line
button,
Release a call on different
line
Select the line want to release hold, press the line, so recovery;
NOTES
•
Engaging the Hold feature typically generates music or a beeping tone.
•
A held call is indicated by the Yellow green
and flashing Line button or Hold in the LCD.
3.5.10 Transferring Calls
Transfer redirects a connected call. The target is the number to which you want to transfer the call.
Talk to the transfer
recipient before
transferring a call
(consult transfer)
--1) Press
TRANSFER
button or press XFER.
--2) Enter number.
--
3) press “
#”
（
default),
-or press
then transfer the call,
-or wait five
seconds(default)then transfer the call
Transferred to idle
lines or other
numbers without
talking to the transfer
recipient
(Blind transfer)
--1) Press
TRANSFER
button or XFER.
--2) Press
;
--3) Enter number.
--
4) Press “
#”
（
default)
-or press
, then transfer the call.
