www.escene.cn/en/
Escene Communication
Auto-Answer the Coming Call
--1) Enable the Auto-Answer feature.
--2) Auto-Answer mode you can set in the MENU>Function Setting> Auto Answer >Device
⚫
Speaker
⚫
Handset
⚫
Headset
When you use the Handset mode, at this time you need to hand up the handset and then
it can work at this status.
--3) Filter Groups
Auto-answer the coming call in this special groups.
3.5.8 Ending a Call
To end a call, hang up. Here are some more details. NOTE: Press and hold the speaker key can change to Handset feature.
Hang up while using the Handset
--Return the handset to its cradle,
-or press
End
Hang
up
while
using
the
Speakerphone
--Press
Speaker
button,
-or press
Line
button for the appropriate line,
-or press
End
Hang up while using the Headset
--Press
Handset
button,
（
Do not keep the headset mode),
-or press
End
(keep the headset mode)
Hang up one call, but preserve
another call on the other line
--Press
End
,
-or refer to the above three methods
3.5.9 Using Hold and Recover (Switch Calling Line)
You can hold and resume calls. You can take a call in one line at any time, and the other lines would be hold. As a result of that, you can switch
different calling line on our phone. Note: If the phone is not having the hold button, pls using the soft key.
If you want to...
Then...
Put a call on hold
--Press
HOLD
button,
-or press soft key
Hold a line and switch to another
line
Press another
Line
button for the appropriate line
Resume a call on current line
--Press
Line
button,
Release a call on different line
Select the line want to release hold, press the line, so recovery;
NOTES
•
Engaging the Hold feature typically generates music or a beeping tone.
•
A held call is indicated by the Yellow-green and flashing Line button or Hold in the LCD.
