Smart Security IP Intercom
4.1 RFID Card management
State
Normal
Normal mode, the user can trigger relay by RFID
card.
Card Issuing
Manage mode, to add relay permission for RFID
card.
Card
Revoking
Manage mode, to remove relay permission for RFID
card.
4.1.1 RFID Card issuing/revoking in the WUI of the phone
Card Issuing steps:
Set card reader state=Card Issuing.
Put the RFID card in the reader of the phone, you’ll hear the voice “du~”.
Refresh the web, you’ll see there’s a new message in the “Door Card table”
Now you can use this card to trigger the relay.
Card Revoking steps:
1) Set card reader state=Card Revoking.
2) Put the RFID card in the reader of the phone, you’ll hear the voice “du~”.
3) Refresh the web, you’ll see there’s a message loose in the “Door Card table”
4) Now this card was removed, it could not trigger the relay any more.
PS: Must remember to set card reader state=Normal when finishing con figuration.
www.escene.cn/en
ESCENE COMMUNICATION CO.,LTD