© ESCAPE FITNESS LIMITED 2022 | MARS SCREEN-QUICK START GUIDE - REV APRIL 2022
MARS SCREEN.
QUICK START GUIDE.
1.
STEP. 1
CONNECT THE POWER CABLE.
When unpacked you will see that the power socket is protected by a safety cover at the
rear of the screen at the bottom (Figure 1). This cover ensures that the power is less likely
to be accidentally disconnected and that the power cable is secure. To attach the power
cable, first remove the two screws holding the safety cover in place (Figure 1). Once
removed, insert the power cable into socket shown below (Figures 2 and 3). After the
power cable is in place, re-fit the safety cover (Figure 4).
Before you plug into a power source, ensure that the power cable is not pulled or put
under strain. The screen can then be connected to the power source.
2.
STEP. 2
POWER UP.
Turn on the screen using the on/off power rocker
switch on the left hand side of the unit as shown
below. The rocker switch has a “I” and a “0”. When
“I” is pressed down, the power is on and the unit
will start when plugged in and power is present.
Figure 1.
Figure 2.
Figure 3.
Figure 4.
