ESCAPE FITNESS
MARS USER MANUAL | MAY 2022
BASIC OPERATION.
INITIAL POWER ON.
1.
STEP. 1
CONNECT THE POWER CABLE.
When unpacked you will see that the power socket is protected by a safety cover at the rear of the screen at the bottom (Figure 1). This cover
ensures that the power is less likely to be accidentally disconnected and that the power cable is secure. To attach the power cable, first remove
the two screws holding the safety cover in place (Figure 1). Once removed, insert the power cable into socket shown below (Figures 2 and 3).
After the power cable is in place, re-fit the safety cover (Figure 4).
Before you plug into a power source, ensure that the power cable is not pulled or put under strain. The screen can then be connected to the
power source.
2.
STEP. 2
POWER UP.
Turn on the screen using the on/off power rocker switch on the
left hand side of the unit as shown below. The rocker switch
has a “I” and a “0”. When “I” is pressed down, the power is on
and the unit will start when plugged in and power is present.
Figure 1.
Figure 2.
Figure 3.
Figure 4.
