ATTENTION
: If hinge is positioned as
shown here
(
Detail B
), Rotate the hinge as
shown in
Detail C
. Do not take hinge off.
18
Hinge Assembly
with “elbow”
pointing down.
18
17
17
38
Plastic Washer goes
between Strut Tube
(#17) and Hinge (#18)
30
38
34
30
Or
Scan QR code with
your smartphone:
8
34
HARDWARE NEEDED
30
38
1/4" Plastic
Washer
1/4-20 Locknut
(Qty. 2)
(Qty. 2)
1/4-20 X 1 1/2 Phillips
Truss Head Screw
(Qty. 2)
CAUTION
: Position hinges exactly as
shown in
Detail C
or table will not
operate correctly and could be damaged.
34
38
30
18
17
Elbow
17
Detail B
Detail C
Incorrect position
of hinge with elbow
pointing up.
In the correct position Hinge #18
will look like a “V” when attached
to Strut Tube (#17).
Hinge Assembly
with “elbow”
pointing down.
Correct position
of hinge with elbow pointing down
Elbow
If you want to see a video on how to attach hinges to Strut tube go to:
https://support.escaladesports.com/videos/
7.
Attach Hinges (#18) to Strut Tubes (#17) as shown in
Figure 5
&
Detail C
. With
hinge positioned as shown, align hole in hinge with hole in Strut Tube and attach with
¼” Screw (#30), Plastic Washer (#38) and Locknut (#34). Plastic Washer (#38) goes
between Strut Tube and Hinge. Tighten nut securely. Repeat for other Hinge.
CAUTION: Hinges must be positioned exactly as shown or table will not
operate correctly and could be damaged.
5
Figure
Note
: If hinge (#18) is positioned as shown in Detail B, you will have to rotate the hinge to
the position shown in Detail C. DO NOT unscrew the hinge, you can rotate the hinge
without unscrewing it from the table.
DO NOT OPEN THE TABLE TO PLAYING
POSITION UNTIL BOTH TOPS ARE
INSTALLED! DO NOT LEAVE TABLE
STANDING UNATTENDED. IT COULD BE
KNOCKED OVER CAUSING SERIOUS
BODILY INJURY OR PROPERTY DAMAGE.
