©
202 0 Escalad e Sports
Fo r Custome r Servic e Cal l 1-888-996-2729
8
All Rights Reserved.
FIGURE 5
PARTS REQUIRED
2pcs -
P6
Bottom Leg End Panel
STEP 5
Carefully install
H8
Barrel nuts into parts
P5
&
P6
Leg End Panel aprons as per diagram.
Attach end panels to the inside of the legs using
H3
bolts ,
H4
flat washers , and
H9
lock washers as
per diagram . Snug tighten this hardware using the
T1
Allen wrench .
Do not overtighten.
Tighten all Leg bolts now using the T1 Allen wrench – tight.
12pcs -
H4
Flat Washer
12pcs -
H3
Allen Head Bolt
12pcs -
H9
M8 Lock Washer
12pcs -
H8
Barrel Nut
2pcs -
P5
Top Leg End Panel
P6
P5
H4
H8
H4
H4
H4
H9
H9
H9
H9
H3
H3
P5
P6
P7
CAUTION: Two strong adults are recommended to flip
the table as shown.
1. Grab the table on the ground.
2. Turn the table over.
3. Place it on all four feet at the same time on the ground.
NOTE: The threaded hole in barrel nut must
align with the hole in the end of the leg end
panel for correct H3 bolt installation .
