ESC G41T-M, User Manual, Page: 25 / 56

19
Installing the Motherboard
LPT_H: Onboard parallel port header
This is a header that can be used to connect to the printer, scanner or other devices.
1
STROBE
14
ALF
2
PD0
15
ERROR
3
PD1
16
INIT
4
PD2
17
SLCTIN
5
PD3
18
Ground
6
PD4
19
Ground
7
PD5
20
Ground
Pin Signal Name Pin Signal Name
8
PD6
21
Ground
9
PD7
22
Ground
10
ACK
23
Ground
11
BUSK
24
Ground
12
PE
25
Ground
13
SLCT
26 Key
Installing a Hard Disk Drive/CD-ROM/SATA Hard Drive
This section describes how to install IDE devices such as a hard disk drive and a CD-
ROM drive.
About IDE Devices
Your motherboard has one IDE channel interface. An IDE ribbon cable supporting
two IDE devices is bundled with the motherboard.
You must orient the cable connector so that the pin1 (color) edge of
the cable corresponds to the pin 1 of the I/O port connector.
IDE: IDE Connector
This motherboard supports four high data transfer SATA ports with each runs up to
3.0 Gb/s. To get better system performance, we recommend users connect the CD-
ROM to the IDE channel, and set up the hard drives on the SATA ports.