3.69
6 x 9”/150 x 230 mm
Woofer
Installation Manual
esbcar.com
TECHNICAL SPECIFICATIONS
• Power handling:
240 W peak, 120 W continuous
• Frequency response:
55 Hz - 9 KHz +/- 3dB
• Crossover cut-off:
From 65Hz 48dB/Oct., from 70Hz
24dB/Oct., from 75Hz 12dB/Oct.
from 80Hz 6dB/Oct.
• Sensitivity:
88.5 dB SPL 1W/1m
• Overall diameter: 168 x 235 mm
Total Height: 82 mm
Mounting depth: 72 mm
Mounting hole: 148 x 215 mm
MAIN FEATURES
• Copper/aluminum 25 mm voice coil
• FEA motor optimized
• High temperature aluminum former
• Large high grade ferrite magnet
• Axial force coil ventilation
• Fiber reinforced paper cone
• ABS basket with self damping system
• Oversized single wave rubber
suspension
• Poly cotton spider
• Balanced symmetrical construction
• Motor metal parts CNC machined
NOTE
: Make sure that your mounting location will not cause damage to the components of your vehicle.
Check for airbag system location, speaker can’t be located over or close it. Never play this component
without crossover, especially with high powers, this can damage it. Never play the system with amplifier
in clipping or high distortion level. If use a passive crossover, use a dedicated crossover system, don’t
use a generic passive crossover, these are not designed for this speaker impedance and the indicated
cut-off frequency may not be true.
