User Manual
14
POWER SOURCE AND GROUNDING
It’s recommended to use the dryer on its own dedicated power outlet for both convenience and safety. The power outlet
must be grounded.
Important! If the power cord is damaged, it must be replaced by your local distributor or one of its authorised service
representatives. Please contact your local Customer Care team and ensure the appliance is completely disconnected
from the power supply.
INSTALLATION
Refer to the Figure 3 on page 10 of this manual.
Your Dryer should be placed in a ventilated area with a minimum of 80mm between the top of the dryer and ceiling and
with no less than 10cm distance from the wall or cabinetry. It is also recommended that there are no obstacles within
1.5m of the dryers’ front, to ensure ease of operation and ventilation.
WALL HANGING INSTALLATION
Step 1: Confirm the following components are all within the included accessories:
• 2 × Hooks
• 2 × Holders
• 4 × Expansion bolts
• 1 × Installation positioning paper
Step 2: Determine a location to mount the dryer and confirm that the construction type of the wall and location is
suitable for installation.
• Do not hang the dryer on the wall if the wall is not solid.
• The distance in front of the wall must be more than 150cm.
Tip! Ensure power cord and plug is accessible and reaches a power source.
Step 3: Paste the installation positioning paper to the solid wall.
• Draw a line with a level, and paste the positioning paper based on the line.
Note: Ensure the screw holes will not overlap with the power outlets or taps nearby.
• The bottom edge of the positioning paper must be 45cm+ higher than the floor.
Remove the adhesive paper behind the positioning paper, and paste the positioning paper
to the wall horizontally.
Installation Instructions
Wall Hanging Installation Manual
1. Accessories include components:
hooks (2), holders (2), expansion bolts (4), installation
positioning paper (1), and installation manual (1).
Hook
Holder
Expansion
Bolt
Installation
Positioning Paper
When hang
straight,Hang the
hooks into the
two holes.
When hang
upside down,
Hang the hooks
into these two holes.
When hang upside
down, Fix the holder
at the position of the
two screws.
When hang straight,
Fix the holder at the
position of the two
screws.
(Applicable to 6kg and 7kg models)
Wall Hanging Installation Manual
1. Accessories include components:
hooks (2), holders (2), expansion bolts (4), installation
positioning paper (1), and installation manual (1).
Hook
Holder
Expansion
Bolt
Installation
Positioning Paper
When hang
straight,Hang the
hooks into the
two holes.
When hang
upside down,
Hang the hooks
into these two holes.
When hang upside
down, Fix the holder
at the position of the
two screws.
When hang straight,
Fix the holder at the
position of the two
screws.
(Applicable to 6kg and 7kg models)
