esatto.house
17
OVERALL CLEANING
Dust behind the refrigerator and clean the floor around the appliance
to improve the cooling effect and energy efficiency. The interior of the
refrigerator should be cleaned regularly to avoid odour. Soft towels
or sponges dipped in water and non-corrosive neutral detergents are
suggested for cleaning. The freezer should be cleaned with clean water
and a cloth.
Do not use hard brushes, clean steel balls, wire brushes, abrasives, such as toothpastes, organic
solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid or alkaline items clean
refrigerator considering that this may damage the fridge surface and interior.
Do not rinse with water so as not to affect the electrical insulation properties.
WARNING:
Please unplug the refrigerator for defrost and cleaning.
DEFROSTING
The refrigerator is made based on the air-cooling principle and thus has automatic defrosting
function. Frost formed due to change of season or temperature may also be manually removed
by disconnection of the appliance from power supply
or by wiping with a dry towel.
OUT OF OPERATION
Power failure:
In case of power failure, even if it is in summer, foods inside the appliance can
be kept for several hours; during the power failure, reduce the times the door is opened shall be
reduced, and no more fresh food shall be put into the appliance.
Long-time nonuse: The appliance shall be unplugged and then cleaned; then the doors are left
open to prevent odour.
Moving:
Before the refrigerator is moved, remove all objects from inside , fix the glass partitions,
vegetable holder, freezing chamber drawers and etc. with tape, and tighten the leveling feet;
close the doors and seal them with tape. During moving, the appliance shall not be laid upside
down or horizontally, or be vibrated;
the incline during movement shall be no more than 45°.
The appliance shall run continuously once it is started. Generally, the operation of the appliance
shall not be interrupted; or otherwise the service life may be impaired.
Maintenance and care of the appliance
DISPLAY OF NORMAL RUNNING
On the occurrence of a failure, the corresponding icons will give a combined blink. The error
codes and types are shown as follows:
ERROR CODE
ERROR DESCRIPTION
E2
Temperature sensor of Freezer fail
E5
Defrosting sensor of Freezer fail
E6
Communication error
E7
Ambient temperature sensor fail
