esatto.house
15
CLEANING THE MESH FILTERS
1. Remove a mesh filter.
Cleaning option #1: Cleaning Manually (max 30°C)
• Soak the filter for about 3 minutes in water with a mild non-corrosive grease-removing detergent.
• Wash the filter separately from crockery and kitchen utensils.
• Brush the filter gently with a soft brush.
NOTE: Do not apply too much pressure to avoid damaging the filter
• Over time, fading and discolouration may happen.
This is normal and is not considered a warranty issue.
2. Cleaning option #2: Cleaning using the dishwasher (max 30°C)
• Place the filter in the dishwasher and run a program with a mild non-corrosive grease-removing
detergent. NOTE: It is advisable not to use rinse aids.
• Wash the filter separately from crockery and kitchen utensils.
• Brush the filter gently with a soft brush.
NOTE: Do not apply too much pressure to avoid damaging the filter
• Over time, fading and discolouration may happen.
This is normal and is not considered a warranty issue.
3. Leave the filter to dry naturally out of direct sunlight.
4. Put the filter back in its correct position.
INSTALLING AND REPLACING THE CARBON FILTER
The carbon filter is an optional spare part available to purchase by contacting our After Sales Support Team.
Do not clean or wash the carbon filters. If a carbon filter
is used, we recommend replacing the carbon filter every
3 to 6 months.
To install and replace the carbon filter:
1. Disconnect the power supply from the wall socket.
2. Remove the mesh filter.
3. Install or replace the active carbon filters
(refer to the image on the right)
4. Place the mesh filter back into position.
5. Reconnect power supply to the wall socket.
REPLACING THE LIGHT GLOBE
WARNING!
Only a qualified electrician or service agent may replace the globe.
• Unplug all power connections before opening the appliance.
•
RISK OF BURNING!
Always let the globe cool down before replacing it.
• Always use gloves or a cloth to avoid direct contact with your hands.
• Direct contact may reduce the lifespan of the globe.
To replace the light globe:
1. Make sure you switch off the appliance.
2. Disconnect the power supply from the wall socket.
3. Press the filter lock and remove the filter.
4. Replace the light globe
5. Place the mesh filter back into position.
6. Reconnect the power supply to the wall socket.
