esatto.house
15
CLEANING THE MESH FILTERS
1. Remove a mesh filter.
Cleaning option #1: Cleaning Manually (max 30°C)
• Soak the filter for about 3 minutes in water with a mild non-corrosive grease-removing detergent.
• Wash the filter separately from crockery and kitchen utensils.
• Brush the filter gently with a soft brush.
NOTE: Do not apply too much pressure to avoid damaging the filter
• Over time, fading and discolouration may happen.
This is normal and is not considered a warranty issue.
2. Cleaning option #2: Cleaning using the dishwasher (max 30°C)
• Place the filter in the dishwasher and run a program with a mild non-corrosive grease-removing
detergent. NOTE: It is advisable not to use rinse aids.
• Wash the filter separately from crockery and kitchen utensils.
• Brush the filter gently with a soft brush.
NOTE: Do not apply too much pressure to avoid damaging the filter
• Over time, fading and discolouration may happen.
This is normal and is not considered a warranty issue.
3. Leave the filter to dry naturally out of direct sunlight.
4. Put the filter back in its correct position.
INSTALLING AND REPLACING THE CARBON FILTER
The carbon filter is an optional spare part available to purchase by contacting our After Sales Support Team.
Do not clean or wash the carbon filters. If a carbon filter is used, we recommend replacing the carbon filter
every 3 to 6 months.
To install and replace the carbon filter:
1. Disconnect the power supply from the wall socket.
2. Remove the grease filters.
3. Install or replace the active carbon filters located at both ends of the motor.
4. Place the grease filter back into position.
5. Reconnect power supply to the wall socket.
6
EN
Cleaning the cooker hood
• To protect the main body from corrosion over a long period of time, the cooker
hood should be cleaned with hot water plus non corrosive detergent every two
months.
• Please do not use abrasive detergent for it will damage the body.
• Keep the motor and other spare parts free from water, as this will cause damage to
the appliance.
• Before cleaning the appliance please remember to cut off power
• The carbon filter shouldn’t be exposed to heat.
• Please don’t tear open the fixed bar around the carbon filter.
• If the plug or cord is damaged, please replace it with special soft cord
Installation of the carbon filter
• Remove the grease filters
• The charcoal filters are located at both end of the motor. Turn the charcoal filters
until they are unscrewed.
Note
: The carbon filters should be replaced every 3 - 6 months or if they show signs
of damage.
open
close
