esatto.house
13
USING THE ADDITIONAL FUNCTIONS
DELAY FUNCTION
This function is used for delaying the start of the drying program up to 24 hours. When the delayed program starts,
the time starts to countdown on the display and the delay icon blinks.
1. Load your laundry and make sure the machine door is closed.
2. Press the
On/Off
button,then use the program selector knob to select the desired program.
3. You can additionally select the
Anti-Crease
or
Signal
functions according to your need.
4. Press the
Delay
button.
5. Repeatedly to press the
Delay
button to select the desired delay time.
6. Then press the
Start/Pause
button and the dryer will be in standby and the delay time will start counting down.
The drying procedure will be automatically performed when the delay time is over.
7. If you press the
Start/Pause
button again, the delay function will be paused.
8. If you want to cancel the “Delay” function, please press the
On/Off
button.
TIME
When the
Time
program is selected, the
Time
button can be used to adjust the drying time in 10 minute increments.
ANTI-CREASE FUNCTION
At the end of the drying cycle, the anti-crease operation time is automatically set to 30 minutes or 120 minutes if you
select it. Press the
Anti-crease
button to select the time. If you do not want to use this function simply remove your
laundry at the end of the cycle.
This function prevents the laundry from creases. The laundry can be removed during the anti-crease phase.
Except Cool, Wool and Refresh, all the other programs have this function.
INTENSITY
You can adjust the dryness level of the laundry by pressing the
Intensity
button.
1. The intensity function can be activated only before the program starts.
2. Except the Cotton Iron, Delicate, Wool and Time program, all the other programs can be adjusted with the
Intensity function.
MY CYCLE
Used to define and save your favourite program, so you can use it frequently with the press of a button.
1. Select the desired program and other drying functions.
2. Press and hold the
Time
for 3 seconds until the beep sounds and the desired program settings have been saved.
3. Next time you dry, turn the program selector to the
My Cycle
position, then you can start your favourite program.
If you want to change the
My Cycle
settings, repeat the steps (1) and (2).
CHILD LOCK
This machine incorporates a special child safety lock, which can prevent children from carelessly pressing buttons
and doing damage to themselves or the appliance.
1. When the drying cycle is running, press the
Anti-Crease
button at the same time for 3 seconds to start
the child lock function.
2. When child lock function is set, the display will show Child lock icon and all button are deactivated,
except the
On/Off
button.
3. To deactivate the child lock function, the
Anti-Crease
button shall be pressed at the same time for 3 seconds.
