Page:
7
User Manual:
→
Leave the chains unattached until the installation process has been completed.
WARNING!
Whilst every care is taken to eliminate burrs and raw edges from this product, please
take care when handling. We recommend using protective gloves.
Important!
Ensure that you route all mains cables well clear of any adjacent heat source.
INSTALLATION CLEARANCES:
→
This oven may be fitted flush to base units. However, for models with side opening doors,
we recommend a side clearance of 60mm between the oven and any side wall to allow
the door to be opened fully.
→
The oven should not be placed on a base.
→
No shelf or overhang or rangehood should be closer than a minimum of 650mm, but
check with the rangehood manufacturer’s recommendations.
→
The oven must have a side clearance above cooktop level of 90mm up to a height of
400mm.
DIMENSIONS:
→
All sizes are nominal, and some variation is to be expected. The ‘depth’ of the oven, as
given below, is to the front of the door and excluding the knobs and handles.
WIDTH:
540mm,
DEPTH:
600mm,
HEIGHT:
900-930mm.
LEVELLING THE OVEN:
→
There are four adjustable feet on the base of the oven. Slacken the locknut with an M8
spanner and turn the feet by hand to adjust the height of the oven.
CONNECTION TO ELECTRICITY SUPPLY:
Important!
This appliance must be installed by a qualified person.
→
40 amp hardwire required and needs a dedicated circuit from the main switchboard.
→
Ensure that you route all mains electrical cables well clear of an adjacent heat source,
such as an oven or grill.
→
This appliance must be earthed.
→
Where a fixed connection is used, a device allowing the appliance to be isolated on
all poles from the mains supply with a contact opening width of at least 3mm must be
provided.
→
After connection to electricity, please ensure that all electrical parts are working.