Esatto EBTDW2D, User Manual

Page: 17 / 32

esatto.house 17
10
When the working cycle has finished, the buzzer of dishwasher will sound 8 seconds, then stop. Turn off
the appliance using the ON/OFF button, shut off the water supply and open the door of the dishwasher.
Wait a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they
are still hot and more susceptible to breakage. They will also dry better.
Switch Off the Dishwasher
1.Switch off the dishwasher by pressing the ON/OFF button.
2.Turn off the water tap!
Open the door carefully.
Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around 15 minutes
before removing from the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they
will be cooler and the drying will be improved.
Unloading the dishwasher
It is normal that the dishwasher is wet inside.
Change the Program
Forget to Add a Dish
will keep on working after 10 seconds.
If you open the door when washing, the machine will pause. When you close the door , the machine
NOTE:
At the end of the Wash Cycle
A forgotten dish can be added any time before the detergent cup opens.
Add forgotten dishes.
Close the door
After the spray arms stop working,you can open the door
completely.
2
3
Open the door a little to stop the washing.
1 4
5
6
Premise:
Otherwise, the detergent may have already been
released, and the appliance may have already drained the wash water. If this
is the case, the detergent dispenser must be refilled (see the section entitled
" Loading the Detergent " ).
Press S Button to pause the machine when the door is closed ,Press
Button more than three seconds the machine will be in stand by state ,
then you can change the program to the desired cycle setting (see the section
entitled " Starting a wash cycle" ).
NOTE: If you open the door during washing, the machine will pause. When you
close the door , the machine will keep on working after 10 seconds.
The program lights show the state of the dishwasher:
a) One of the program lights on----------stand by or pause
b) One of the program lights blinking----- run
You can modify the washing program, When the dishwasher just
runs for a short time.
tart/Pause
Program
Press the button Start/Pause
Press the button, the dishwasher will run
after 10 seconds.
Start/Pause
WARNING!
It is dangerous to open the door when washing,
because the hot water may scald you.