Chapter 3: DS850 User Interface
41
EVS5200_DOC_SOP_DS850
Gate Flipper
Reports
Use the reports option to print the following reports:
Mark Code
- contains the mark code data from the scanner’s image processor for
the last ballot scanned and saved on the scanner.
Digital Readings
- contains the reading data from the scanner’s image processor for
the last ballot scanned and saved on the scanner.
Barcode Report
- contains data from the scanner’s image processor for the last card
scanned and saved on the scanner. It converts the barcodes on the card to a series
of digits.
Follow the steps below to print the reports:
1.
Press
Reports
on the Tests
screen to display the Reports
screen.
2.
On the Reports screen, highlight
the desired report by pressing
on the report title and then press
.
3.
Press
Done
when you are finished printing reports.
Note:
This section refers to future functionality that is not currently available on the DS850.
Note:
ES&S Technicians use these reports to analyze scanner performance.
Note:
If the last ballot scanned was out-stacked, then the Mark Code and Digital Readings
reports will not work because a ballot image was not saved for the last ballot scanned.
Note:
The Zero, Results,
Batch/Bin, Precincts
Processed, and System
Readiness reports are not
available from this Reports
screen. They are printed
from the Reports menu. See
for more
information on accessing
and printing those reports.
