5 OPERATION
0464 547 001
- 10 -
© ESAB AB 2017
5
OPERATION
5.1
Connections and control devices
1.
Antenna
Combined Wi-Fi, 3G and GPS antenna to provide wireless connectivity
2.
Status indicating LED
Indicates the status of WeldCloud™ Mobile
3.
Power on LED
Indicates that there is power to the WeldCloud™ Mobile
4.
LAN connector 2
Ethernet port 2 used for external connections
5.
CAN connector, male
Used to provide power supply to WeldCloud™ Mobile and to connect the control
cable to the W8
2
control unit or to the PEK control panel
6.
CAN connector, female
Used for communication with ESAB wire feed unit
7.
LAN connector 1
Ethernet port 1 used to connect to W8
2
control unit or to PEK control panel
