-- 5 --
bt23d1ea
3
INTRODUCTION
The
Tig 4000i
is a TIG welding power source, which can also be used for MMA
welding.
There are eight variants of the power source:
S
Tig 4000i with TA4 control panel
S
Tig 4000i with TA6 control panel
S
Tig 4000i with cooling unit and TA4 control panel
S
Tig 4000i with cooling unit and TA6 control panel
S
Tig 4000i with autotransformer and TA4 control panel
S
Tig 4000i with autotransformer and TA6 control panel
S
Tig 4000i with cooling unit, autotransformer and TA4 control panel
S
Tig 4000i with cooling unit, autotransformer and TA6 control panel
NB:
These instructions describe an Tig 4000i with cooling unit and autotransformer.
ESAB’s accessories for the product can be found on page
19
.
3.1
Equipment
The Tig 4000i is delivered with 5m return cable, instructions for power source and
one instruction for the control panel.
3.2
The control panel
The power source is supplied with one of the following control panels:
S
TA4 panel
With a knob for adjusting the current. Other parameters are controlled by
pushbuttons, with symbols in the display panel.
S
TA6 panel
With a knob for adjusting the current. Other parameters are controlled by
pushbuttons, with text in the display panel.
See the separate instructions for detailed descriptions of the control panels.
GB
Summary of Contents for Tig 4000i Aristo
