14
Accessories
A.
For Plasma Welding
1.
Pulse unit
p/n: 1 090 123
2.
Manual remote control 8 m cable
p/n: 1 090 124
16 m cable
p/n: 1 090 125
25 m cable
p/n: 1 090 126
3.
Foot remote control FC 4
p/n: 1 090 130
ATTENTION: If foot remote control is used, switch-
i
must be in pos.
and poti
c
set to 0.
B.
for TIG welding only
Combined pulse-/dual current-control
p/n: 1 270 253
Maintenance
REMARK
This plasma welding unit is designed, manufactured and tested for
highest quality standards in order to ensure long trouble-free service
life. Regular maintenance is, however, of utmost importance for reliable
and safe operation of the unit. Your attention is therefore drawn to all
maintenance instructions included in this operating manual.
As a general rule each welding unit should be thoroughly inspected,
tested and serviced at least once a year. In the case of high loading
of the units, maintenance should be performed more frequently.
Wear is a slow process in the case of electro-mechanical and moving
components in particular. If wear is detected in good time, repair
costs are kept low and advantages are significant as regards performance,
reliability and safety. Unnoticed wear can become dangerous both for the
equipment and the user.
Have this unit inspected and maintained by authorised dealers at
regular intervals.
Note:
Use original ESAB parts throughout; otherwise the warranty will
rendered null and void.