ESAB PCM-500i, Instruction Manual

Page: 33 / 40

33
SECTION 6 REPLACEMENT PARTS
6.1 GENERAL
Replacement Parts are illustrated on the following fig-
ures. When ordering replacement parts, order by part
number and part name, as illustrated on the figure.
Figures 6-1 through 6-4 show replacement parts for the
following PCM-500i Power Source Assemblies:
208/230 Vac, 1-phase - P/N 36304 (ESAB)
400 Vac, 3-phase - P/N 36306 (ESAB)
Always provide the series or serial number of the unit on
which the parts will be used. The serial number is
stamped on the unit nameplate.
6.2 ORDERING
To assure proper operation, it is recommended that only
genuine ESAB parts and products be used with this
equipment. The use of non-ESAB parts may void your
warranty.
Replacement parts may be ordered from your ESAB
distributor or from:
ESAB Welding & Cutting Products
Attn: Customer Service Dept.
PO Box 100545, Ebenezer Road
Florence, SC, 29501-0545
Be sure to indicate any special shipping instructions
when ordering replacement parts.
To order parts by phone, contact ESAB at 1-843-664-
5540. Orders may also be faxed to 1-800-634-7548. Be
sure to indicate any special shipping instructions when
ordering replacement parts.
Refer to the Communications Guide on back cover of this
manual for a list of customer service phone numbers.