10
MECHANIZED CONVERSION KIT INSTALLATION INSTRUCTIONS
red wire "+"
black wire "-"
14. Route the "2-wire cable" downward behind the shelf brace.
15. Locate the 3-pin connector on the existing main power control board.
16. Align the 3-pin connector with the pc board header to identify which end of the connector aligns with
the "+" and "-" on the pc board. On the connector, insert the red wire to the "+" and black wire to the "-"
from the "2-wire cable" as shown and tighten.
17. Plug in the 3-pin connector on the pc board.
3-pin connector
