-- 7 --
bm38d1ea
WARNING!
Rotating parts can cause injury, take great care.
WARNING!
There is a risk of tipping if the wire feed unit is fitted with a counterbalance arm. Secure the
equipment, especially if used on an uneven or sloping surface.
When moving the equipment use intended handle.
NOTE!
Never pull on the gun.
6.1
Connections and control devices
Connecting control cable
When connecting the control cable, it is
important to secure the cable with the
load--removing grommet.
Ensure that the cover is properly screwed
into place.
OrigoFeed 30--4
1
Knob for setting wire feed
speed
6
Connection for welding gun
2
Switch for activation of 2/4 stroke, spot
welding, cold wire feed or gas purging
7
Connection for welding current from power
source, (OKC)
3
Knob for setting spot welding time
8
Connection for shielding gas
4
Knob for setting burnback time
9
Connection for control cable from power
source
5
Switch for creep start OFF / ON
GB
