5 OPERATION
0460 157 301
- 12 -
© ESAB AB 2018
5
OPERATION
General safety regulations for handling the equipment can be found in the "SAFETY"
chapter of this manual. Read it through before you start using the equipment!
5.1
Connections and control devices
1
Connection for cooling water from the
torch - RED
9
Main power supply switch, 0 / 1 / START
2
Connection with ELP* for cooling water to
the torch - BLUE
10
White indicating lamp - Power supply ON
3
Cooling water filler
11
Orange indicating lamp - Overheating
4
Connection for return cable (+)
12
Control panel (see the respective
instructions)
5
Connection for remote control
13
Connection for cooling water. Not used on
this model.
6
Connection for welding cable (-)
14
Connection for cooling water. Not used on
this model.
7
Connection for start signal from the
welding torch
15
Connection for gas hose
8
Connection for gas to the TIG torch
16
Fuse 42 V (from serial number
950-xxx-xxx only)
*ELP = ESAB Logic Pump, see "Cooling unit" section.
Summary of Contents for Origo Tig 4300iw AC/DC
