ESAB Origo Feed 484 P5, Instruction Manual

Page: 20 / 56

20
Origo™ Feed 484 P5
2) DESCRIPTION
3) TECHNICAL DATA
2.1) General description
The Origo™ Feed 484 P5 wire feeders are designed for semi-automatic MIG/MAG welding with solid wires,
cored wire and aluminum in services of average and heavy duty.
They have a wire feed mechanism of 4 feed rollers geared and an electronic control system.
They can be installed over the power source, hanging over the working area with appropriate bracket or with
a trolley to move it around (optional).
The feeders have re-feeding of the engine which guarantees precision of the wire feeding speed.
4) CONTROLS
4.1) Front panel
1) Potentiometer for wire speed control.
2) Potentiometer for power source voltage control.
3) Voltmeter/Amp meter to visualize the welding parameters.
4) Switch 2T/4T. Allows selecting the command mode of the welding pistol trigger. In mode 2T the welding
is continuously maintained by keeping the trigger pressed. In mode 4T, the welding is activated and
maintained continuously with a single touch in the trigger, without the need of maintaining it pressed. In
order to disconnect it, just press it again.
484 P5
42 - 50/60
1.5 - 25
0.6 - 1.6
0.9 - 3.2
0.8 - 1.6
Yes
Yes
Yes
Yes
Yes
0 - 0.5
Optional
270 x 550 x 340 (without wire protection)
270 x 660 x 415 (with wire protection)
17
TABLE 3.1
Euro-conector
Feeder
Voltage
Wire speed
Wire diameter
Solid steel
Cored wire
Aluminum
Welding gun connection
Voltmeter/amp meter
2T/4T stroke
Voltage adjustment of the welding source
Multi turns voltage adjustment potentiometer
Manual wire drive
Anti-stick (sec.)
Bobbin cover
Dimensions (W x L x H) (mm)
Weight (kg)