-- 45 --
bk02d13e
OCF 2A
to LTN/LTR 160.
1. Remove the lower cross--head screws from the sides of the power source.
2. Place the power source on the cooling unit.
3. Tighten the screws in the bottom through the cover on the cooling unit.
4. Plug the power cable into an earthed wall socket 230 V, 6 A.
5. Connect the water--cooled torch and do a test run.
OCF 2A
free--standing
1. If the cooling unit is to stand upright, fit the feet to the right side panel.
2. Turn the cover upside down to provide a flat surface and screw it in place with
M5 screws.
3. Place the cooling unit on its side or stand it upright, secure with M5 screws.
4. Fit an earthed plug. (the existing plug complies with Swedish regulations)
5. Plug the power cable into an earthed wall socket 230 V, 6 A.
6. Connect the water--cooled torch and do a test run.
GB
