-- 24 --
cmek0de1
TECHNICAL DATA
The MEK 4 wire feed units is of enclosed construction with four--wheel drive to the wire.
Power supply
42 V 50 -- 60 Hz
Power requirement
300 VA
Feed speed
1.9 -- 25 m/min
Welding gun connection
EURO
Max. diameter of wire bobbin
300 mm
Weight
16 kg
Dimensions (l x w x h)
645 x 240 x 480 mm
There is a risk of tipping if the MEK 4 is fitted with a counterbalance arm. Secure the
equipment, especially if used on an uneven or sloping surface.
Limit the angle of rotation of the wire feed cabinet using the straps supplied.
When moving the equipment, do
NOT
pull on the torch.
WARNING
MAINTENANCE
Regular maintenance is important in ensuring safe and reliable operation.
S
The feed unit
Clean and replace the wearing parts in the feed mechanism at regular intervals.
Do not set too high a pressure on the pressure rollers, as this can cause abnormal wear of
the pressure rollers,. the feed rollers and wire guide. Instructions for setting of the wire
feed pressure are on page 25.
S
The welding gun
Blow the wire guide clean with compressed air at regular intervals and clean the gas
nozzle.
