ESAB LKA 180, Service Manual, Page: 23 / 34

− 21 −
clka1de1
MAINTENANCE
S Cleaning away dust
Blow the unit clean with compressed air at reduced pressure.
S Wire feed mechanism.
The wire feed mechanism should be cleaned, and wearing parts replaced, at regular inter-
vals in order to ensure smooth, reliable wire feed.
Do not tension the pressure roller too hard, as this will result in abnormal wear to the
pressure roller, the feed roller and the wire guide.
S Welding torch.
Blow the wire guide clean and clean the gas nozzle at regular intervals.
WELDING DATA SELECTION
MACHINE SETTINGS, LKA 180 single − phase
clka1p15