ESAB GMH, Instruction Manual, Page: 13 / 44

-- 93 --
hga1o1ea
Switch with 5 positions
Selection of joint--tracking and joint--searching options:
S
Manual preset -- Position
S
Vertical and horizontal joint--tracking -- Position
S
Vertical and horizontal joint--tracking with joint--searching to the right -- Position
S
Vertical and horizontal joint--tracking with joint--searching to the left -- Position
S
Vertical joint--tracking -- Position
NOTE!
If the switch is in a joint--tracking position when the equipment is switched on then
the equipment will not start joint--tracking for safety reasons. To start joint--tracking,
another position must be briefly selected before returning to the required position.
Control lever
S
Manual control of servo slides Up/Down and Left/Right.
The control lever is always overriding.
When the alarm lamp is illuminated the downward manual movement is
blocked.
Lamp pushbutton (rapid speed)
Selection of low or high speed during manual positioning with the control lever.
S
One press on the button activates rapid speed.
A lamp in the button illuminates when the function is activated.
S
Return to low speed by pressing the button again
Check that the lamp has gone out before carrying out further commands.
GB