ESAB CIGWELD 220i, Operating Manual, Page: 25 / 94

Manual 0-5439 4-1 OPERATION
Transmig 220i
OPERATING MANUAL
SECTION 4:
OPERATION
Conventional operating procedures apply when using the Welding Power Source, i.e. connect work
lead directly to workpiece and the electrode wire is fed via the MIG Torch (Consult the electrode wire
manufacturers information for the correct polarity). The welding current range values should be used as a
guide only. Current delivered to the arc is dependent on the welding arc voltage, and as welding arc voltage
varies between different classes of electrode wire, welding current at any one setting would vary according
to the type of electrode wire in use. The operator should use the welding current range values as a guide,
then finally adjust the current setting to suit the application.
2 1
15
14
Volta
17
4
12
11
16
10
5
22
6
7
9
8
Art # A-12897
Figure 4-1: Front Panel Figure 4-2: Rear Panel
4.01 Overview
4.02 Transmig 220i Power Source Controls, Indicators and Features
3
13
ON