ESAB Caddy Arc 152i, Instruction Manual

Page: 11 / 28

© ESAB AB 2008
- 11 -
bh31d1e
8 ORDERING SPARE PARTS
Repair and electrical work should be performed by an authorised ESAB service
technician. Use only ESAB original spare and wear parts.
Arc 152i is designed and tested in accordance with the international and European
standards 60974-1 and 60974-10. It is the obligation of the service unit which has car­
ried out the service or repair work to make sure that the product still conforms to the
said standard.
Spare parts may be ordered through your nearest ESAB dealer, see the last page of
this publication.
9 DISMANTLING AND SCRAPPING
Welding equipment primarily consists of steel, plastic and non-ferrous metals, and must
be handled according to local environmental regulations.
Coolant must also be handled according to local environmental regulations.
Dispose of electronic equipment at the recycling facility!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical and/or
electronic equipment that has reached the end of its life must be disposed of at a
recycling facility.
As the person responsible for the equipment, it is your responsibility to obtain
information on approved collection stations.
For further information contact the nearest ESAB dealer.
GB