1 INTRODUCTION
0460 449 274
- 5 -
© ESAB AB 2013
1.4
Control panel A34
1.
Display
2.
Indication of which parameter is shown in the display (current, voltage or percent)
3.
Display of measurement value for current (A) or voltage (V) during welding.
4.
Knob for setting data (current or percent)
5.
Buttons for weld data memory settings. See "Welding data memory" chapter.
6.
Button for choosing parameters ”Hot start”
or arc pressure ”Arc force”
when MMA welding
7.
Choice of welding method MMA
or TIG
8.
Choice of electrode type ”Basic”, ”Rutile” or ”Cellulose” when MMA welding
9.
Setting from panel
or connecting remote control unit
10.
Display of VRD function (reduced open-circuit voltage)
Measured value in the display for arc voltage (V) and welding current (A), is arithmetic
average value = rectified average value.