ESAB Aristo RoboFeed 3004w, Instruction Manual

Page: 7 / 20

-- 7 --
bm40d1ea
6 OPERATION
General safety regulations for the handling of the equipment can be found on
page 3 . Read through before you start using the equipment!
WARNING!
Assure that the side panels are closed during operation.
WARNING!
Rotating parts can cause injury, take great care.
6.1 Connections and control devices
1 White indicating lamp – Power supply ON 9 Connection for welding gun (EURO)
2 Switch for gas purging 10 Inlet connection for spatter removal air
3 Switch for reversed wire feed 11 Connection for coolant from power source
(cooling unit), BLUE
4 Switch for cold wire feed 12 Connection for coolant to power source
(cooling unit), RED
5 Connection for signals to/from robot
welding gun
13 Connection for shielding gas
6 Outlet connection for spatter removal air 14 Connection for welding current from power
source, (OKC)
7 Connection for coolant from welding gun,
RED
15 Connection for terminating resistor or
forwarding to next wire feed unit
8 Connection for coolant to welding gun,
BLUE
16 Connection for control cable from power
source
GB