3 TECHNICAL DATA
0459 825 301
- 9 -
© ESAB AB 2018
Mig C3000i
Operating temperature
-10 to +40°C
Constant A-weighed sound pressure
< 70 db
Dimensions l × w × h
652 x 412 x 423 mm
Weight
43 kg
Insulation class
transformer
H
Enclosure class
IP23
Application class
Torch connection
EURO
Wire feed speed
0.8 - 25.0 m/min
Max. diameter wire bobbin
300 mm
Wire dimension
Fe
Ss
Al
Cored wire
0.6 - 1.2 mm
0.6 - 1.2 mm
1.0 - 1.2 mm
0.8 - 1.2 mm
Shielding gas
max pressure
All types intended for MIG/MAG welding
5 bar
Motor current
I
max
3.5 A
1)
Valid for power sources without VRD specification on the rating plate.
2)
Valid for power sources with VRD specification on the rating plate. The VRD function is
explained in the instructions for the control panel, if the panel has that function.
3)
Valid for a power source controlled from a U6 control panel
Mains supply, S
sc min
Minimum short circuit power on the network in accordance with IEC 61000-3-12.
Duty cycle
The duty cycle refers to the time as a percentage of a ten-minute period that you can weld or
cut at a certain load without overloading. The duty cycle is valid for 40 °C / 104 °F, or below.
Enclosure class
The
IP
code indicates the enclosure class, i.e. the degree of protection against penetration
by solid objects or water.
Equipment marked
IP23
is intended for indoor and outdoor use.
Application class
The symbol
indicates that the power source is designed for use in areas with increased
electrical hazard.
