ESAB 0558002834, Instruction Manual

Page: 7 / 48

SECTION 1 DESCRIPTION
7
1.1 GENERAL
The PCM-1125 is a compact, completely self-contained
plasma cutting system. As shipped, the system is fully
assembled and ready to cut after being connected to
input power and a source of compressed air (90-150 psi).
The PCM-1125 package uses the heavy-duty PT-27 torch
to deliver cutting power for severing materials up to 1-1/4
inch thick. Refer to the following paragraphs for descrip-
tions of the PCM-1125 packages available as well as
performance specifications.
Use only ESAB Plasmarc torches that are designed
for use with this console. Use of torches not de-
signed for use with this console could create an
ELECTRIC SHOCK HAZARD. Do NOT use or modify
the PT-23, PCT-80 or any other torch for use on this
console.
1.2 SCOPE
The purpose of this manual is to provide the operator with
all the information required to install and operate the
PCM-1125 plasma arc cutting package. Technical refer-
ence material is also provided to assist in troubleshoot-
ing the cutting package.
1.3 PACKAGES AVAILABLE
PCM-1125 listed on the front cover includes the following
components:
PT-27 Torch, 75° head, 25-ft. .................. P/N 21661
PT-27 Spare Parts Kit (see Table 1-1) .... P/N 21623
PCM-1125 Console/Power Source .......... See below
Depending on the choice of input power, each package
includes the following appropriate PCM-1125 Console/
Power Source:
208/230 V, 50/60 Hz, 1 or 3-phase .......... P/N 37495
460 V, 50/60 Hz, 3-phase ........................ P/N 37497
575 V, 60 Hz, 3-phase ............................. P/N 37499
Table 1-1. PT-27 Spare Parts Kit, P/N 21623, Contents
Description Part Number Quantity
50 - 70 A Nozzle
Electrode
Swirl Baffle
Heat Shield
Standoff Guide
Valve Pin 33369
33366
33367
21616
21420
21619 4
3
1
2
1
1