10
ENGLISH
Always follow the instructions in this manual before using the device. Please keep this manual
for future reference.
Distribution:
Audio Design Lautsprecher Vertriebs GmbH
Am Breilingsweg 3, DE-76709 Kronau/Germany
The Audio Design Lautsprecher Vertriebs GmbH hereby declares that the
VMR301
device complies
with Directive
2014/53 EU
. The full text of the EU declaration of conformity is available at the following
Internet address:
www.esxaudio.de/marine/ce
DECLARATION OF CONFORMITY
GENERAL INFORMATION
• All registered product names, trademarks and brands are the property of their respective owners.
• This user’s manual was created with great care.
• Technical changes and errors reserved.
• Due to the further development of this device, it is possible that the information in this manual is in-
complete or does not match the delivery status.
• In general, the assembly and installation of the device should be carried out by a trained and tech-
nically skilled specialist. If you have problems with the operation or installation of the device, contact
your dealer.
This device is equipped with sensitive technology and should always be handled with care. Observe the
following information in order to extend the service life of the device.
• The device is another electrical consumer that must be operated with the engine running, otherwise
the on-board battery will be discharged.
• Please only use the original accessories supplied. Ensure that the device is adequately fastened
using the installation accessories supplied.
• Make sure all connections are properly made with the correct polarity.
• In the event of a defect or malfunction, do not attempt to repair or open the device yourself. Repairs
should only be carried out by trained and authorized personnel.
• Keep the device and all accessories away from small children.
• Keep the device and its components away from excessive heat.
• Keep the device and its components away from excessive cold.
• Do not use strong chemical cleaners, solvents, or water to clean the device. Use a slightly damp
cotton cloth with a soft surface.
• Replace a blown fuse only with a new one with the same values. However, before replacing a defec-
tive fuse, first check what the cause of the short circuit is. If the fuse blows again, there is a malfunc-
tion in the device. In this case you should contact your authorized dealer.
SAFETY INSTRUCTIONS