www.desatech.com
108796-01M
10
Maintain
Listed
Clearance
Maintain
Listed
Clearance
12' Min.
12' Min.
45°
45
6'
8'
12' Min.
60
45
Position
Firestop
Position
Firestop
Position
Firestop
Listed
Vent Cap
Listed
Vent Cap
Listed
Vent Cap
Maintain
Listed
Clearance
Maintain
Listed
Clearance
Maintain
Listed
Clearance
Maintain
Listed
Clearance
Support Each
Lateral At
Least Every
6 Feet
Maintain
Listed
Clearance
10'
EXAMPLE 3
EXAMPLE 2
EXAMPLE 1
Figure 10 - Typical B-Vent Configuration
VentInG InstallatIon
Continued
If venting horizontally through a side wall be-
comes necessary, a listed thimble approved
for use with B-type vent must be used. Check
with your local codes before venting through
a side wall.
Some codes areas allow the use of existing
B-type vent systems if the system is at or
above the recommended diameter of the flue;
in this case 6".
The flue connection must be made using
listed B-type connectors and the existing sys-
tem must be code inspected for damage and
proper installation.
It is not recommended that this appliance be
common vented with an existing gas burning
appliance. However, if it becomes necessary
to common vent this appliance, the venting
system must be sized and configured in ac
-
cordance with the common venting guides
Appendix G of the current
National Fuel Gas
Code ANSI Z223.1/NFPA 54
and in Canada
with
CAN/CGA B149
.
Note:
Before connecting this appliance to an
existing vent system or a common venting
system consult with your local architect, plan-
ner or building official.
WARNING: This appliance
must be properly connected
to a system and must not be
connected to a chimney flue
servicing a separate solid fuel
burning appliance.
Lowest
Discharge
Opening
Listed
Vent Cap
8 Ft. Min.
Roof Pitch x/12
Listed Clearance
12
x
Listed
Gas
Vent
H (Min)
Height
From Roof
Roof Pitch
H (Min.)
Ft.
m
Flat to 6/1
1.0
0.30
6/1 to 7/1
1.5
0.38
Over 7/1 to 8/1
1.5
0.46
Over 8/1 to 9/1
.0
0.61
Over 9/1 to 10/1
.5
0.76
Over 10/1 to 11/1
3.5
0.99
Over 11/1 to 1/1
4.0
1.
Over 1/1 to 14/1
5.0
1.5
Over 14/1 to 16/1
6.0
1.83
Over 16/1 to 18/1
7.0
.13
Over 18/1 to 0/1
7.5
.7
Over 0/1 to 1/1
8.0
.44
Figure 11 - B-Vent Terminations
