71
A
B G
A
B G
Notice:
When fixing the power cable with the wire clip,
take care to not clamp onto the wires within the sleeving.
The clip must clamp onto the outer insulation sleeve, or
else it may cause damage to one of the one-core wires.
A. Insert one end of this cable through the cable gland on the bottom of the indoor unit, and
connect it to A and B on the appropriate terminal block.
B. Fasten the cable gland to ensure the cable won't get loosen.
Connect the other end of the cable to the terminal block on the outdoor unit. A and B on the
C
.
indoor unit should be connected with A, B, and G on the outdoor unit, otherwise
communication failure error may occur.
4. Installation Walkthrough
4.5. Wiring
4) Connect the signal cable between the indoor and outdoor unit:
Retrieve the signal cable from the accessories bag.
C
B
A
B
corresponding
with each other
A