11
ROUTINE
MAINTENANCE
C
C
D
E
Grease all four cylinder bushings
[C]
every
8 hours
of operation.
Skid Shoe Height Adjustment
1. Raise the v-plow off of the ground and block up
securely.
2. Remove the lynch pin
[D]
from the first skid shoe
and slide the skid shoe out of the mount bushing.
3. Install spacer washers
[E]
on the skid shoe to
achieve the desired cutting edge height, and slide
the skid shoe back into the mount bushing.
4. Store remaining spacer washers on top of the
mount bushing, an install the lynch pin to secure
the skid shoe and washers in place.
5. Repeat steps 2-4 for the other skid shoe. Make
sure both skid shoes are set to the same height.
8
