Erskine Attachments HP35, Operator'S Manual

Page: 4 / 30

4
Improper operation can cause serious
injury or death.
Pre-operation
•
This attachment is designed to generate continuous
hydraulic flow to run attachments mounted on the front
of a tractor only.
NEVER use this machine for any
other purpose.
•
Read the operators manual for the “Tractor”.
NEVER
allow untrained people to operate.
•
Operating instructions must be given to everyone
before operating this attachment and at least once a
year thereafter in accordance with OSHA regulations.
•
NEVER exceed the maximum recommended input
power or speed specifications for the attachment.
Over-powering or over-speeding the attachment may
cause personal injury and/or machine damage.
•
NEVER use machine with an attachment that is
heavier than the rated lift capacity of the tractor.
Instability can lead to serious injury or death.
•
Keep all shields, guards, and covers in place.
•
Do not modify equipment or add attachments that are
not approved by Erskine Attachments LLC.
•
Use adequate safety warning lights and devices as
required by local regulations. Obey all local laws and
regulations regarding machine operation on public
property.
•
Only use attachment with a tractor equipped with a
Roll Over Protection System (ROPS) and seatbelt.
Operation
•
Avoid loose fitting clothing. Clothing caught in moving
parts may lead to serious injury or death.
•
To protect the operator from hearing loss, ear
protection is required unless the tractor is equipped
with a noise reduction cab that meets OSHA 1910.95
standard.
•
Hydraulic connections may be hot after use. Use
gloves if connecting or disconnecting after use.
SAFETY
Operation
•
Check and be sure all operating controls are in
neutral before starting the engine.
•
Keep people away from tractor and attachment when
in use.
•
NEVER operate near embankments or terrain that is
so steep that rollover could occur.
•
Always stay in the operator position with seatbelt
fastened when using the attachment.
•
Before leaving the operators position, disengage
PTO drive, stop engine, set park brake, and wait for
all motion to stop.
•
NEVER place hands near attachment while
engine is running.
Avoid High Pressure Fluids Hazard
•
Escaping fluid under pressure can
penetrate the skin causing serious injury.
•
Avoid the hazard by relieving the
pressure before disconnecting hydraulic
lines.
•
Use a piece of paper or cardboard, NOT BODY
PARTS, to check for suspected leaks. Wear
protective gloves and safety glasses or goggles
when servicing or performing maintenance on
hydraulic systems.
•
If an accident occurs, see a doctor immediately. Any
fluid injected into the skin must be surgically
removed within a few hours or gangrene may result.
Maintenance
•
NEVER make adjustments, lubricate, clean, or
perform any service on the machine while it is in
operation.
•
Make sure the attachment is serviced on a daily
basis. Improper maintenance can cause serious
injury or death in addition to damage to the
attachment and/or your equipment.