AK3000
– User Manual
By means of the
▲
or
we can set the first flashing digit of the
PIN xxxx
and by
ENTER
button we confirm it. So we can
enter rest of the PIN. With
ENTER
button we can get to the frame 2.8.1.1. :
Using buttons
▲
or
we can choose required parameter then by means of
ENTER
button confirm and flashing parameter
is able to change by
▲
or
buttons:
......
Frame 2.8.1.1 we can leave by click of the
►
( ESC ). Parameter is set now.
Boiler type. Numeric value represents power of the boiler and L character
is for Lambda module connected.
Caution! Parameter setup can
change related parameters.
XY16, XY16L,....XY100,
XY100L etc.
Main fan is suction type. We can change it to the blower type.
or
Combustion thermometer is installed.
Boiler reaches END status after
decreasing the combustion temperature below
end
value.
yes / no
Auxiliary fan is not connected.
yes / no
Boiler thermometer is installed with KTY type. You can change it to the Pt1000.
KTY / Pt1000
