10
G4
G5
G6
G1
G2
G3
FCA2 COM FCC2
SCA
N
L
POWER
MOTOR2 (G2-G1-COM)
MOTOR1 (G2-G1-COM)
ST1
FT1
ST2
FT2
ST1
FT1
P1 P2 P3
ST2
FT2
P4 P5 P6
STOP
P7 P8
P11 P12
LOCK
FCA1
FCC1
P15 P14 P16
P22 P23
Courtesy
Light
Lamp.
G7 G8
G9 G10
24Vac
P176Z
VIVO-M201: 230Vac
VIVO-M201M: 125Vac
VIVO-M201: max 2.300W
VIVO-M201M: max 1.250W
VIVO-M201: 230Vac
VIVO-M201M: 125Vac
N
L
G1 G2 G3
G4 G5 G6
General connections
Turning direction:
check operation using the mini-pushbuttons PUL1 (close) and PUL2 (open). If the turning direction
of any operator is not correct, interchange the cables connected in cable connectors G1 and G2 or G4 and G5.
DL2:
receiving RSD radio signal
DL3:
programming enabled
DL4:
gate opening
DL5:
gate closing
PUL1:
close mini-pushbutton
PUL2:
open
mini-pushbutton
T:
earth connection
When pressing PUL1 (close), DL5 lights up and A1 G2-G3 and A2 G5-G6
cable connectors are enabled.
When pressing PUL2 (open), DL4 lights up and A1 G1-G3 and A2 G4-G6
cable connectors are enabled.
A1 operator connections:
G1
open
G2
close
G3
common, grey
A2 operator connections:
G4
open
G5
close
G6
common, grey
VIVO-M201:
230Vac/50Hz
VIVO-M201M:
125Vac/60Hz
When using a single
operator, connect it to
cable connectors G1, G2
and G3 (operator A1).
SW2 Functions during programming (DIP1=ON)
DIP1=ON
: programming enabled (DL3 lights up)
DIP1=ON and DIP2=ON
: total open/close programming
DIP1=ON and DIP3=ON
: pedestrian open/close programming
DIP1=ON and DIP4=ON
: total opening radio code programming
DIP1=ON and DIP6=ON
: pedestrian opening radio code programming
