background image

 

12

 

Limited Warranty 

 

The Electric Railroad Company warrants to the original consumer purchaser that this product will be free of 
defects in materials and workmanship for a period of 90 days from the date of original purchase. This 
warranty does not cover service, repair, or replacement to correct any damage caused by improper 
installation, improper connection, external electrical fault, accident, disaster, misuse, abuse, or modifications 
to the product. All other express or implied warranties, including the implied warranty of merchantability 
and fitness for a particular purpose, are hereby disclaimed.  If this product is not in good working order as 
warranted, the sole and exclusive remedy shall be repair or replacement. In no event shall The Electric 
Railroad Company, or any dealer, distributor, or authorized installation and/or repair service provider be 
liable for any damages in excess of the purchase price of the product. This limitation applies to damages of 
any kind, including but not limited to, direct or indirect damages, lost profits, lost savings or other special, 
incidental, exemplary or consequential damages whether for breach of contract, tort or otherwise, or 
whether arising out of the use of or inability to use the product, even if The Electric Railroad Company, or 
any dealer, distributor, or service provider has been advised of the possibility of such damages or any claim 
by any other party.  Some states do not allow the exclusion or limitation of incidental or consequential 
damages so the above limitation or exclusion may not apply to you.  During this warranty period, the 
product will either be repaired or replaced (at our option) without charge to the purchaser, when returned 
either to the dealer with proof of the date of purchase or directly to The Electric Railroad Company when 
returned prepaid and insured with proof of date of purchase.  Some states do not allow limitations on how 
long an implied warranty lasts, so such limitations may not apply to you. This warranty gives you specific 
legal rights, and you may also have other rights, which vary from state to state. 
 
 

Repairs 

 

Each and every product is thoroughly tested before it is shipped. The likelihood that it is not working when 
it reaches you is very small. However, if after troubleshooting it yourself you cannot get it to work properly, 
you should contact us to help determine the problem.  
 
Should your product ever need repair, you should return it postpaid directly to The Electric Railroad 
Company.  If the product is within the warranty period, it will be repaired or replaced and returned to you 
free of charge. Units out of warranty will be repaired or replaced for a service charge of $50.00 at our 
option. 
 
Please email to 

[email protected]

 for return authorization before returning any product. 

 
 

Disclaimer 

 

Improper installation or configuration of the Cruise Commander Lite Board can cause 
overheating and fires!  Since it is not possible to understand every installation, it is the 
consumer’s responsibility to verify proper operation of the upgrade to prevent malfunction.  
If you are unsure of install, please contact us first before taking any risks! 

 

 

All manual contents are Copyright ©2006, The Electric Railroad Company. 
TMCC, CAB-1, R2LC, SignalSounds, and RailSounds are registered trademarks of Lionel, LLC. 
 

 

Summary of Contents for Cruise Commander Lite













Reviews: